What is Class 100 Nitrile Glove

The Class 100 workshop is called Class 100 because of its cleanliness, the number of particles with a particle size greater than or equal to 0.1 microns cannot be greater than 100. The concept that there can be no more than 100 dusts of 0.1 microns in the workshop is what it is all about. So in the protection requirements above strict, do not think that the choice of dust-free clean gloves will not care, this idea is wrong.

Each industry has different requirements for clean rooms, which are graded as 10w, 10,000, 1,000, 100 and 10 (the smaller the number, the higher the clean room grade). Generally speaking the clean room for the food processing industry is class 10w, the electronic industry has relatively high requirements for clean rooms, but a class 10,000 clean room is sufficient for its use, and most clean products are of a higher class than the clean room.

The details of clean gloves are also particularly important, which clean gloves are used in class 100 areas. The following is a list of the details you need to pay attention to when choosing clean gloves for class 100 workshops:

Each industry has different requirements for clean rooms, which are classified as 10w, 10,000, 1,000, 100 and 10 (the smaller the number, the higher the clean room level). Generally speaking, clean rooms in the food processing industry are class 10w and in the electronics industry the requirements for clean rooms are relatively high, but a class 10,000 clean room is sufficient for its use and most clean products are of a higher class than clean rooms.

To sum up, a class 100 clean room should wear class 100 dust-free clean gloves!

WootC nitrile gloves do not contain latex proteins and will not cause allergic reactions. They are also anti-static, ageing and oil resistant and are shaped according to the shape of the human hand, with great sensitivity, excellent stretching and puncture resistance, high tensile strength and excellent abrasion resistance and cleanliness.

Nitrile gloves are mainly processed from nitrile rubber and are used in opto-electronic factories, medical, pharmaceutical, hygiene, food processing and other operating industries to prevent the hand from touching and holding products in the process of production to prevent falling and sweaty hands causing poor product protection.

The main properties are puncture resistance, oil and solvent resistance, fingertip linen treatment to avoid slipping of the apparatus when using, high tensile strength to avoid tearing when wearing, effective to avoid skin allergy caused by powder and cause poor products.